Siemens MM75 1HP VFD 230Vac 1-Phase In, 0 - 230Vac 3-Phase Out, Made in EU

Description

Siemens MM75 1HP Variable Frequency Motor Drive.  Motor shown is NOT included.
Siemens P/N: 6SE3013-4BA07.
Based on the Siemens/Eupec/Infineon BSM10GD60D2 IGBT ECONOPACK 1Module.
Can operate from L1 to N or L1 to L2 230 Vac ± 15%.
Comes with Operators Manual(s) and Quick Start Guide on CD or DVD.
Output frequency is 0 - 400 Hz.
Has 5 User Configurable Inputs for commands like: ON/OFF, FWD/REV, JOG FWD, JOG REV.
Has been reset to Factory Default Settings.
Made in Germany and built to last.
Will be well packaged for shipment.
Features
• Microprocessor–control for reliability and flexibility.
• Remote control capability via RS485 serial link using the USS protocol.
• Ability to control up to 31 inverters via the USS protocol.
• A comprehensive range of parameters is provided to enable the inverters to be configured for use in almost any application.
• Built–in non–volatile memory for storing parameter settings.
• Factory default parameter settings pre–programmed for European and North American requirements.
• Output frequency (and hence motor speed) can be controlled by one of five methods:
(1) Digital frequency setpoint
(2) Analogue setpoint (voltage or current input)
(3) Motor potentiometer
(4) Fixed frequency
(5) Via remote data transmission
• Built–in dc injection brake.
• Built–in brake chopper for external resistor (MICRO MASTER).
• Automatic load compensation by flux current control.
• Built–in ramp generator for variable ramping times.
• Two relay outputs incorporated.
• Analogue output incorporated.
• External connection for optional enhanced operator panel or for use as external RS485 interface.
• Closed loop control using a standard Proportional, Integral, Derivative (PID) control loop function.
Technical Specifications
Series
MicroMaster SimoVert
Phase Rating
1Phase Input - 3 Phase Output
Enclosure Rating
NEMA Type 1
Horsepower Rating
1 HP
Rated Input Voltage
230 Vac Single Phase ± 15%
Input Current
6.5A
Product Condition
Refurbished
Output Amperage Rating (Nominal)
3.5 A
Output Amperage Rating (Max Continuous)
3.9 A
Output Voltage
0 to Input Voltage
Model
MM75
Height
184mm (7.25in)
Width
149mm (5.86 in)
Depth
066mm (2.60 in)
Weight
1.1 kg (2.4 lbs)
Additional Information
These units were removed from a working Mobile Medical CT Scanners by myself.  These units have been fully cleaned and tested.  These units are outstanding in their quality and durability.  In fact, the Power Module used in these units are more expensive than some of the VFD's made in China.  I have personally installed many Siemens VFD's and count on their quality.  The last picture shows the unit working properly and driving a 3-Phase AC motor from 1-Phase AC line
voltage.
NOTE:  Motor and wiring shown in picture are NOT included.  Neither are the License Plates.