Electro Arc Metal Disintegrator Model 2S

Description

Electro Arc Metal Disintegrator Model 2S - Electro Arc Metal Disintegrator Model 2S REMOVE BROKEN TAPS, BOLTS & DRILLS IN MINUTES! s/n 14505 ARC*ER Current Monitoring Disintegrator Head Arc•er Portable Head Designed to remove broken tooling from .079” to 3/4” (2 mm to 19.05 mm). Head is 12.5” (317.5 mm) long. Operates at any angle. LED current monitoring assists the operator to obtain maximum performance and saves on electrode consumption. The upper end has a 1/2” (12.7 mm) by 2” (50.8 mm) long straight shank arbor which can be held in a 3-point chuck. Features of all our AC portable machines: Base/Cabinet • Holds the power supply, coolant system and control pane • Heavy-duty casters for easy movement around the shop • Levelers for stability in operation Head Support options • Use existing equipment such as a drill press or milling machine. Built-in Coolant System • Provides coolant for the disintegration process • Internal pump provides 90 psi coolant pressure • Internal tank with filter Comes with Cutting oil and Large Table Electro Arc Model 2S Manual Model 2-S Arc•er head makes and breaks sixty arcs per second. Built-in LED power indicator assists the operator to control feed. Operates in any position including vertically and horizontally. Heavy, reinforced frame construction 201/8” wide x 22” deep x 391/4” high (514 x 558 x 997 mm) with push handle, two lift eyes and four heavy-duty ball bearing casters. Guarded control panel, lighted, oil-tight push buttons, low water level indicator light, external fuses and master stop switch. 120, 240, 380, 480, or 550 volt. Disintegrator transformer rating 15 KVA. Up to 10 cutting heat settings, depending on transformer selected. Circuit breaker protection, Machine Tool electrical standards. 7.4 gal. (28 l) coolant tank. Wire mesh cartridge filter intake. Pump 2 GPM, 90 PSI, 1/3 HP motor, single phase, 120 volt. Power/Coolant Cable (conducts both liquid coolant and electrical current) double stranded, woven copper braid with polyvinyl cover. 71/2 ft. (2.3 m) length standard. Approximate weights: Net 450 lb. (204 kg), Gross domestic 575 lb. (260 kg), Gross export 650 lb. (295 kg). Volume: 23 cu ft (0.65 cu m Excellent Condition
***Please Read Everything Below Before Buying***
No International or APO / FPO Shipping. Additional charges may apply to AK & HI or residential freight shipments.
If it is not pictured or described, please do not assume it is included.
All specifications are believed to be accurate but are subject to verification by the buyer.
The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. Please contact us with any specific requests or questions. We do not have everything listed as we are always receiving new inventory. If you need anything, please contact us.
WE ARE A PROUD MEMBER OF THE MDNA.